The Fortus 900mc Gen II: The Most Powerful FDM System, Perod. Remarkable Agility, Sharp Accuracy and High Return on Investment. With 13 engineering thermoplastic options and a massive build envelope, the 900mc exceeds demands of the most rigourous applications.
The Fortus 900mc Gen II, the most precise and largest of the Production family, was specifically designed for digital manufacturing. Not only was the build envelope dramatically increased in size over previous Fortus systems, there are significant upgrades in its mechanical, electro mechanical and electrical systems, optimizing precison, throughput, and reliability.
The Fortus 900mc Gen II 3D Production System builds durable, accurate, repeatable parts as large as 914 x 610 x 914 mm (36 x 24 x 36 in.). With abundant material options, it’s suitable for building fixtures, factory tooling and end-use parts, as well as the most demanding functional prototypes. This system features two material bays for maximum uninterrupted production. The 900mc builds in 13 real thermoplastics for applications that require high performance, bio-compatibility, static dissipation or resistance to heat, chemicals or UV radiation. With four layer thicknesses to choose from, you can strike just the right balance between fine feature detail and FDM’s fastest build.
Produce Certified Aircraft Interiors with the Fortus 900 Gen II Solution
Certifying additively manufactured parts for aircraft installation just got a lot easier. The Stratasys Aircraft Interiors Certification Solution gives aerospace companies a faster, more streamlined process. This multi-part solution includes the Aircraft Interiors Configuration Fortus 900mc Production System in tandem with the the establishment of design allowables for ULTEM 9085 resin material, approved by the National Center for Advanced Materials Performance (NCAMP). An Equivalency Toolkit and Process Control Document is included to ensure consistent build results to show equivalency to the design allowables. For full Aerospace Certification details check out our Aerospace page!
Specially Configured Fortus 900mc Gen II
Provides consistent, reliable material properties and build results.
Certified ULTEM9085 Material
Full traceability back to raw material, with certificates of analysis and performance.
|System Highlights:|| |
Largest build envelope of 36 x 24 x 36 inch (914 x 610 x 914 mm)
Precision ball screw technology for increased accuracy, repeatability, and reliability
Holds the most material volume
Based on material, manufactured parts can be used for high heat applications
|System Size (XYZ):|| |
109.1 x 66.3 x 79.8 inches ( 2772 x 1683 x 2281 mm)
|Build Envelope:|| |
36 x 24 x 36 inch (914 x 610 x 914 mm)
The system will accept two build sheet sizes:
- 36 x 24 x 36 inch (914 x 610 x 914 mm) build sheet or
- 16 x 14 x 16 inch (406 x 356 x 406mm) build sheet
|Thermoplastic Build Materials:|| |
ABS-M30: for great tensile, impact and flexural strength and environmental stability
ABS-M30i: for bio-compatibility and food-grade applications
ASA: for UV stability and the best aesthetics
ABS ESD7: for static dissipation
ABSi: tough, translucent plastic
NYLON12: for maximum toughness with forgiveness
NYLON6: for maximum flexibility
PC: for superior mechanical properties and heat resistance
PC-ISO: for bio-compatibility and superior strength
PC-ABS: for the highest impact strength, plus the mechanical properties and heat resistance of PC and the surface appeal of ABS
PPSF: for heat and chemical resistance
ULTEM 9085: for best mix of mechanical, chemical and thermal properties (available in Certified Grade)
ULTEM 1010: for food-grade and biocompatibility applications; superior heat resistance (available in Certified Grade)
|Layer Thickness (material dependant):|| |
0.020 inch (0.508mm)
0.013 inch (0.330 mm)
0.010 inch (0.254 mm)
0.007 inch (0.178 mm)
|Achievable Accuracy|| |
Parts are produced within an accuracy of +/- .0035 inch or +/- .0015 inch per inch(+/- .089 mm or +/- .0015 mm per mm whichever is greater).*
|Network Communication:|| |
10/100 base T connection. Ethernet protocol
|Operating Environment:|| |
Maximum room temperature of 85F (29.4C).
Maximum room dew point of 78F (25.6C).
|Power Requirements:|| |
230 VAC, Nominal 3-Phase service with 5% regulation 230VAC measurd phase-to-phase
50 Hz or 60Hz
40 Amp Circuit
Control Center TM
FDM TEAM TM (optional advanced software)
*ULTEM 9085 is a trademark of SABIC Innovative Plastics IP BV ***Note: Accuracy is geometry dependent. Achievable accuracy specification derived from statistical data at 95% dimensional yield. See Fortus 900mc accuracy white paper for more information